Corey’s Handyman Service
Serving Temecula & Murrieta, CACall or text 951-477-8009
Fence and gate repair · Temecula Valley

We handle fence and gate repair: posts reset, boards replaced, gates rehung

A post starting to lean, boards split or popped loose, a gate that drags and will not catch the latch. We put it back to straight. A couple of pictures is enough for us to price it, free of charge.

We start at the postWe get right back to youMon to Sat, by appointment
Free quoteFrom a photo

Photos down the fence line work best

Text us pictures of the fence or the gate and your city, and we get right back with a price.

Text photos to 951-477-8009
You see the price before you book
Free quote from a photo
We charge by the job, not by the hour
We answer texts
No travel charge
Posts, boards and gates

We reset leaning posts and rehang gates that drag

A wood fence out here takes the weather hard. Summers dry the boards out, and when the Santa Anas blow they push on a whole run at once. Posts shift, boards work loose, and a gate that used to close on its own no longer lines up with the latch.

All of that is fence repair, gates included. We reset the post that moved, put new boards where the old ones split, and rehang the gate on hardware that can carry it, so it swings clear and latches.

Where a leaning fence starts

The boards get the blame, but the post is usually the problem. A fence leans because a post has shifted or gone soft at the base, and the panels fastened to it follow it over. We put the post right first, and the run lines back up behind it.

A cordless drill driving screws through a fence board into the rail
Driving new screws through a fence board

Three steps put a fence back on its line

The same run of work covers one bad post or a gate that will not latch.

A cordless drill driving a screw into a wooden fence rail with a string line stretched along the fence
Step 1

Walk the fence and set the post right

We go down the line and find which posts moved and which boards are still good. The post behind the lean comes back to plumb and gets set to stay.

Set plumb and on line
Gloved hands drilling into a weathered wood fence panel outdoors
Step 2

Put new boards where the old ones split

Broken and popped boards come off and new ones go on, screwed into the rails. We match the size of what is already up so the run reads as one fence.

Sized to match what is there
A hand holding a yellow spirit level flat to check a surface
Step 3

Hang the gate level and set the latch

The gate goes back on hinges that can carry the weight, hung level so it clears the ground and the latch lines up. We swing it and check it before we pack up.

Swung and latched before we leave

What a fence and gate repair comes to

One bad post and a run that needs half its boards are not the same job, so there is no flat rate. Text photos and we send back one number, free.

The five things that move the price

  • 1How many posts and boards have to be replaced
  • 2The gate, whether it needs rehanging or new hardware
  • 3The shape the wood is in along the rest of the run
  • 4Concrete at the posts, which changes how one comes out
  • 5Stain or seal after, if you want the new wood sealed
Straight talk

A post rotted at the ground line cannot be patched

Wood that has gone soft where it meets the dirt has nothing left to hold a screw, and bracing it only pushes the lean further down the run. When we find one we say so, and price a post set properly in its place instead. It costs more than a board, and it is the version still standing next winter.

A worker fitting a fresh picket into a weathered wooden fence outdoors
Fitting fresh wood into an old fence line

Send the indoor jobs with the fence photos

If the fence is not the only thing on your list, say so when you text. It all gets priced together as one number.

Common questions

Questions we get about fences and gates

These cover leaning posts, board replacement, and gates that will not latch. A different fence question, text it over and we will answer it.

Get the number before you decide

Text pictures of the fence or the gate and we send back what the repair comes to, free.

Text the photos over
My fence is leaning, does the whole thing have to come out?

Usually not. A lean almost always traces back to one or two posts that have moved, and the panels follow them over. We reset the posts that shifted and the panels straighten with them. Send photos down the line and we will tell you which it is.

My gate drags and will not latch. Can you fix it?

Yes. A dragging gate is the hinges giving out, the post it hangs on leaning, or the gate sagging out of square. We rehang the gate square on fresh hinges and reset the latch to meet it.

Do you replace single fence boards?

Yes. We pull the damaged boards and screw new ones to the rails, matched to the width and height of the boards around them, so the new wood does not stand out from the rest.

Do you set the posts in concrete?

Where the post calls for it, yes. A post carrying a gate or sitting at the end of a run gets set in concrete so it stays put. The plan comes with the price.

How much does fence and gate repair cost?

Fence and gate repair is priced by the job, not by the hour, so one number covers the whole repair. The price follows how many posts and boards need doing, the shape of the wood, and whether the gate needs rehanging. Text over photos and we send the exact price back free, before you book.

Can you do the fence, the gate, and the rest of my list?

Yes. Send photos of the fence, the gate, and anything else waiting around the house, and it all gets priced together as one job. One number comes back before anything is booked.

Which cities do you cover for fence and gate repair?

Temecula, Murrieta, Menifee, Lake Elsinore, Wildomar, Winchester, and French Valley. There is no travel charge inside the service area.

Get your estimate

Need a leaning fence or a sagging gate fixed in the Temecula Valley?

Send photos down the fence line and of the gate, and we put one free price on the repair. The work waits until you have said yes to the number.

A rusted slide bolt latch screwed to a weathered wooden gate
A gate latch worn down by the weather